Acier Lachine is offering a wide variety of steel angles and structural angles. In addition, we are able to offer the structural angles covered with a primer layer or a layer of zinc (galvanization).
A36/44W is one of the most widely used carbon steels for angles by the construction industry. It is a low-cost material compared to specialty steels and exhibits the strength required for structural applications. In addition, it is weldable, formable, and machinable. Galvanizing the steel increases its resistance to corrosion.
The steel angles are used in a range of industrial applications, including, machinery and Equipment Frames (Braces and Corners), transportation Frames and Corners, support frames that require welding, riveting or bolting on bridges and buildings and general structural use in construction.
ANGLES (STEEL ANGLE)
Standards(ASTM or AISI): A36/44W
Available dimensions: 20′ & 40′ or cut to size
|wdt_ID||Size in Inches||Size in MM||Weight: Lbs./Lin. Ft.|
|1||1/2″ x 1/2″||12.7mm x 12.7mm|
|2||1/2″ x 1/2″ x 1/8″||12.7mm x 12.7mm x 3.18mm||0.380 lbs.|
|3||3/4″ x 3/4″||19mm x 19mm|
|4||3/4″ x 3/4″ x 1/8″||19mm x 19mm x 3.18mm||0.590 lbs.|
|5||3/4″ x 3/4″ x 3/16″||19mm x 19mm x 4.76mm||0.840 lbs.|
|6||1″ x 1″||25.4mm x 25.4mm|
|7||1″ x 1″ x 1/8″||25.4mm x 25.4mm x 3.18mm||0.800 lbs.|
|8||1″ x 1″ x 3/16″||25.4mm x 25.4mm x 4.76mm||1.160 lbs.|
|9||1″ x 1″ x 1/4″||25.4mm x 25.4mm x 6.35mm||1.490 lbs.|
|10||1 1/4″ x 1 1/4″||31.8mm x 31.8mm|
|Size in Inches||Size in MM||Weight: Lbs./Lin. Ft.|
Le contenu de cette page est également disponible en: Français